Brother International HL 1270N Network Users Manual - English - Page 105
Defines server BOT/EOT string see Appendix B
UPC - 012502526001
View all Brother International HL 1270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
SET LOAD HOst Sets node name of boot host for (NetWare firmware load) SET LOAD IP aa.bb.cc.dd Sets IP address of load host (TCP/IP firmware load) SET LOAD SOftware Sets host filename of firmware to load SET PAssword Sets console password (default password is access) SET PROtect Set console protection password to prevent access to SET commands (use UNPROTECT command to access SET commands) SET SERVEr Name Set server node name SET SERVEr DEScription Sets node description string displayed with SHOW SERVER command CLear SERVEr STRing stringnumber Removes a string number (refer to Appendix B) SET SERVEr STRing n "..." Defines server BOT/EOT string (see Appendix B) SET SERVIce [EN|DIS] Enable or disables specified protocol on the specified service. SET SERVIce BOT nn Set service BOT string to nn (see Appendix B) SET SERVIce EOT nn Set service EOT string to nn (see Appendix B) SET SERVIce FILter nn Set service filter to nn (see Appendix B) SET SERVIce FMS Set service with specified match string number (see Appendix B) SET SERVIce FRS Set service with specified replacement string number (see Appendix B) SET SERVIce NAme Changes service name A-3