Brother International HL 1270N Network Users Manual - English - Page 45
How to Con Peer-to-Peer (NetBIOS) printing for Windows 95/98/NT
UPC - 012502526001
View all Brother International HL 1270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 4 How to Configure Peer-to-Peer (NetBIOS) printing for Windows 95/98/NT, LAN Server and OS/2 Warp Server Introduction Brother's Print Server range supports SMB (Server Message Block) over the TCP/IP protocol via the NetBIOS interface. This allows direct printing on Microsoft-compatible networks. Because Brother print servers support the SMB protocol over TCP/IP, Brother print server will appear in your network neighborhood. In order for this function to work, you must correctly change the DOMAIN name or WORKGROUP name to match that of your network. Once this is done, the print server will appear automatically in your network neighborhood and you will be able to send print documents to it without having to install additional software. However, in some instances you may find that your Windows 95/98 and Windows NT4.0 systems may receive "Printer is busy" error messages when more that one person attempts to access the print. In this instance Brother have provided the "Brother NetBIOS Port Monitor" software which allows users to continue spooling print jobs while the printer is busy, down or out of paper. The port monitor will hold the jobs until the printer is again available. Note Your computer and print server must have a valid IP address. As for the configuration of TCP/IP network, refer to the chapter "How to Configure TCP/IP printing for Windows NT, LAN Server and OS/2 Warp Server" and "How to Configure Peer-to-Peer Printing for Windows 95/98" chapters of this user guide. 4-1