Brother International HL 1270N Network Users Manual - English - Page 47

Changing the workgroup/domain name using TELNET or BRCONFIG or a web browser, SET NETBIOS DOMAIN

Get Brother International HL 1270N - B/W Laser Printer PDF manuals and user guides
UPC - 012502526001
View all Brother International HL 1270N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Changing the workgroup/domain name using TELNET or BRCONFIG or a web browser If you are unable to use a BRAdmin32 utility or a web browser, you can use TELNET or the BRCONFIG Remote console program (BRCONFIG requires the IPX/SPX protocol to be installed on your PC). When you are connected to the print server, enter the default password "access" in response to the "#" prompt. Type in anything in response to the "Enter Username>" prompt, you will then be at the "Local>" prompt. Now enter the command: SET NETBIOS DOMAIN domainname EXIT where domainname is the name of the domain or workgroup that you are on. If you are not sure what your domain name or workgroup name is look in the Identification tab in your Windows 95/98/NT 4.0 network applet. You can also use a standard WWW browser to change the NetBIOS name, to do this connect to the print server using its IP address and then select the "Configure NetBIOS" option from the print server configuration screen, enter you workgroup/domain name into the "Domain Name" text box. Make sure you submit the changes. 4-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
4–3
Changing the workgroup/domain name using TELNET or BRCONFIG or a web
browser
If you are unable to use a BRAdmin32 utility or a web browser, you can use TELNET or the
BRCONFIG Remote console program (BRCONFIG requires the IPX/SPX protocol to be
installed on your PC).
When you are connected to the print server, enter the default password “access” in response to
the "#" prompt. Type in anything in response to the "Enter Username>" prompt, you will then
be at the "Local>" prompt.
Now enter the command:
SET NETBIOS DOMAIN
domainname
EXIT
where
domainname
is the name of the domain or workgroup that you are on. If you are not
sure what your domain name or workgroup name is look in the Identification tab in your
Windows 95/98/NT 4.0 network applet.
You can also use a standard WWW browser to change the NetBIOS name, to do this connect
to the print server using its IP address and then select the “Configure NetBIOS” option from
the print server configuration screen, enter you workgroup/domain name into the “Domain
Name” text box. Make sure you submit the changes.