Brother International HL 1270N Network Users Manual - English - Page 116
connected to a 100Mbit network.
UPC - 012502526001
View all Brother International HL 1270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
3. Netware GET from a server You must have a Netware server on your network (running IPX/SPX) and you must store the new firmware file in the SYS/Login directory of the server. In this case, your PC makes the print server read the firmware data from the assigned Netware server, the print server attaches to the Netware server and reads the firmware itself.. The Data LED on the printer front panel will blink during the load process and will either go out when the load has completed (on a 10Mbit network) or will stay lit when the printer is connected to a 100Mbit network. If the Data LED does not stop blinking after about two minutes, or blink periodically, check to make sure that you correctly entered all parameters and that your network connections are good. Then power the print server/printer off and then on again, to retry the download. A-14