Brother International HL 1270N Network Users Manual - English - Page 41
Installing the Brother Peer to Peer Software, <USING TCP/IP to change the IP address>, Device
UPC - 012502526001
View all Brother International HL 1270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
If your PC is using the TCP/IP protocol, do the following: 1. Select TCP/IP filter in the left frame of the main window. 2. Select the "Device" menu and choose the "Search Active Devices". Note If the print server is set to its factory default settings, it will not appear in the BRAdmin32 screen, however, when you select the "Search Active Devices" option, it will be found as a unconfigured device. 3. Select the "Device" menu and choose the "Setup Unconfigured Device". 4. Select the MAC address of your print server and click Configure button. Note You can find the node name and MAC address by printing out the printer configuration page. Refer to the Quick Setup Guide for information on how to print the configuration page on your print server. 5. Input the IP address, Subnet mask and Gateway (If needed) of your print server. 6. Click OK then select Close. With the correctly programmed IP address, you will see the Brother print server in the device list. Installing the Brother Peer to Peer Software Setup from the floppy disk 1. Make a backup copy of Brother Network Print Software disk and use this backup disk for the installation process. Store the original diskette in a safe place. 2. Insert the backup installation diskette into the PC. From the Windows 95/98 Start button, select Run. Then enter A:SETUP and press Enter to start the Brother Network Direct Print installation program. 3-3