Brother International HL 1270N Network Users Manual - English - Page 69
BRCONFIG in the menu Start/Program/Brother BRAdmin32 utilities. Otherwise you, Printer Number.
UPC - 012502526001
View all Brother International HL 1270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Note You can find the Netware server name and MAC address by printing out the printer configuration page. Refer to the Quick Setup Guide for information on how to print the configuration page on your print server. 14. Double click the appropriate print server. You will be prompted for a password, the default password is "access". 15. Now select the NetWare tab. 16. Select Remote Printer as the Operating Mode, select the name of your PSERVER NLM as the Print Server Name and select the number of the printer from step 6 as the Printer Number. Note The same service assigned by Netware print server cannot be used for both queue server mode and remote printer mode. If you want to enable remote printer capabilities on a service other than the default NetWare service, you must define new services that are enabled for NetWare and for the desired port. Refer to Appendix B in this manual for information on how to do this. 17. Click OK. And exit BRAdmin32. You must now unload the PSERVER NLM from your NetWare file server console and then reload it in order for the changes to take effect. As an alternative to Brother's BRAdmin32 application or the Novell NWADMIN application, you can use the standard Novell PCONSOLE utility in conjunction with Brother's BRCONFIG program to set up your print queues. BRCONFIG program will be installed at the same time when you install the BRAdmin32 and you can find the BRCONFIG in the menu "Start/Program/Brother BRAdmin32 utilities". Otherwise you can find it in the "Brother Print Server Configuration Utility" diskette. Note that if desired, you may use a WWW browser or TELNET utility - instead of the BRCONFIG utility). 6-8