Brother International HL 1270N Network Users Manual - English - Page 107
Enables or Disables IP Processing, Number of BOOTP/RARP tries
UPC - 012502526001
View all Brother International HL 1270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
TCP/IP Commands SET IP Access [EN|DIS|ALL] aa.bb.cc.dd {Mask ee.ff.gg.hh} Allows or prevents specified IP address from accessing print server SET IP ADdress aa.bb.cc.dd Sets IP address of print server SET IP BOot n Number of BOOTP/RARP tries SET IP [EN|DIS] Enables or Disables IP Processing SET IP RArp nn Sets procedure used by print server when obtaining its IP address. By default the IP address is set along with a default subnet mask and a router address that is the same as the address of the load host. By setting nn to 1, the subnet mask is not set. If nn is set to 2, the router address is not set. If nn is set to 3, neither the subnet mask nor the router address is set. SET IP ROuter aa.bb.cc.dd Sets default router address SET IP SUbnet aa.bb.cc.dd Sets subnet mask SET IP TImeout n Sets inactivity timeout (minutes) SET SERVIce IP [EN|DIS] Enable or disables TCP/IP jobs on specified service SET SERVIce TCP nn SET TCP port number (>1023) on service SHow IP Shows LPD/TCP/TELNET Parameters SHow IP ACcess Shows IP addresses that are allows to access print server SET IP Method [AUTO|STATIC|DHCP|BOOTP] Set method of getting IP address A-5