Brother International HL 1270N Network Users Manual - English - Page 23

Changing the IP Address settings with the Remote Console, Local> SET IP ADDRESS 192.189.207.3 - network password

Get Brother International HL 1270N - B/W Laser Printer PDF manuals and user guides
UPC - 012502526001
View all Brother International HL 1270N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Changing the IP Address settings with the Remote Console a If you are using the remote console, such as TELNET, you will be expected to enter the password of the print server. Press RETURN and enter the default password of "access" in response to the "#" prompt (it will not echo). b You will be prompted for a user name. Enter anything in response to this prompt. c You will then get the Local> prompt. Type SET IP ADDRESS ipaddress, where ipaddress is the desired IP address you wish to assign to the print server (check with your network manager for the IP address to use). For example: Local> SET IP ADDRESS 192.189.207.3 d You will now need to set the subnet mask by typing SET IP SUBNET subnet mask, where subnet mask is the desired subnet mask you wish to assign to the print server (check with your network manager for the subnet mask to use). For example: Local> SET IP SUBNET 255.255.255.0 If you do not have any subnets, use one of the following default subnet masks: 255.255.255.0 for class C networks 255.255.0.0 for class B networks 255.0.0.0 for class A networks e The leftmost group of digits in your IP address can identify the type of network you have. The value of this group ranges from 192 through 255 for Class C networks (e.g., 192.189.207.3), 128 through 191 for Class B networks (e.g.,128.10.1.30), and 1 through 127 for Class A networks (e.g., 13.27.7.1). f If you have a gateway (router), enter its address with the command SET IP ROUTER routeraddress, where routeraddress is the desired IP address of the gateway you wish to assign to the print server. For example: Local> SET IP ROUTER 192.189.207.1 g To verify that you have entered the IP information correctly, type SHOW IP. H Type EXIT or CTR-D (i.e., hold down the control key and type "D") to end the remote console session. 1-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
1-15
Changing the IP Address settings with the Remote Console
a
If you are using the remote console, such as TELNET, you will be expected to enter
the password of the print server. Press
RETURN
and enter the default password of
“
access
” in response to the "#" prompt (it will not echo).
b
You will be prompted for a user name. Enter anything in response to this prompt.
c
You will then get the
Local>
prompt. Type
SET IP ADDRESS ipaddress
,
where
ipaddress
is the desired IP address you wish to assign to the print server (check
with your network manager for the IP address to use). For example:
Local> SET IP ADDRESS 192.189.207.3
d
You will now need to set the subnet mask by typing
SET IP SUBNET subnet
mask
, where
subnet mask
is the desired subnet mask you wish to assign to the print
server (check with your network manager for the subnet mask to use). For example:
Local> SET IP SUBNET 255.255.255.0
If you do not have any subnets, use one of the following default subnet masks:
255.255.255.0
for class C networks
255.255.0.0
for class B networks
255.0.0.0
for class A networks
e
The leftmost group of digits in your IP address can identify the type of network you
have. The value of this group ranges from 192 through 255 for Class C networks (e.g.,
192.189.207.3), 128 through 191 for Class B networks (e.g.,128.10.1.30), and 1 through
127 for Class A networks (e.g., 13.27.7.1).
f
If you have a gateway (router), enter its address with the command
SET IP
ROUTER routeraddress
, where
routeraddress
is the desired IP address of the
gateway you wish to assign to the print server. For example:
Local> SET IP ROUTER 192.189.207.1
g
To verify that you have entered the IP information correctly, type
SHOW IP
.
H
Type
EXIT
or CTR-D (i.e., hold down the control key and type “D”) to end the
remote console session.