Brother International HL 1270N Network Users Manual - English - Page 114
Appendix C, Reloading the Print Server Firmware, General
UPC - 012502526001
View all Brother International HL 1270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Appendix C Reloading the Print Server Firmware General The firmware on the print server is stored in flash memory. This means that you can upgrade the firmware by downloading the appropriate update file. To get the latest firmware update, access the Brother WWW server on www.brother.com. Note We recommend that you factory reset the print server if you upgrade to a later version of software. Instructions on how to perform a factory reset can be found in the quick setup guide that accompanies the print server. Reloading from BRAdmin32 on the Windows 95/98/NT4.0 The BRAdmin32 utility can be used to easily re-program your Brother print server. Start the BRAdmin32 software. Highlight the appropriate print server. Then press select the Control menu and choose Load Firmware. You can select more than one print server by pressing CTRL+ or SHIFT+ on each additional print server. There are three possible ways of sending the new software version to the print server. For which ever method you select, you must enter a password for the print server. The default password for the print server is "access". A-12