Brother International HL 2700CN Users Manual - English - Page 103
Print Settings
UPC - 840356824994
View all Brother International HL 2700CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
6 Put the main controller board back into the printer by sliding it into the guide rails. Figure 4-24 7 Put the metal plate back on and secure the metal plate with the two screws. 8 Reconnect the interface cable (printer cable) to your computer. Plug the printer back in, and then turn on the printer power switch. To check that you have installed the SO-DIMM properly, you can print the Print Settings listing that shows the current memory size. To print the Print Settings listing,see PRINT SETTINGS on page 3-10. 4 - 15 OPTIONS
4 - 15
OPTIONS
6
Put the main controller board back into the printer by sliding it into the guide rails.
Figure 4-24
7
Put the metal plate back on and secure the metal plate with the two screws.
8
Reconnect the interface cable (printer cable) to your computer. Plug the printer back in, and then
turn on the printer power switch.
To check that you have installed the SO-DIMM properly, you can print the Print Settings listing that
shows the current memory size. To print the Print Settings listing,see
PRINT SETTINGS
on page
3-10.