Brother International HL 2700CN Users Manual - English - Page 28

What kind of paper can I use? Type and size of paper The printer loads paper from the installed standard paper tray, optional lower tray, or the optional legal tray. Standard paper tray Since the standard paper tray is a universal type, you can use any of the paper sizes (one paper size at a time) listed in table 1 in Media type, paper size and number of sheets for paper source on page 1-11. The tray can hold up to 250 sheets of paper (75 g/m2 or 20 lb) or up to 15 envelopes (paper can be loaded up to the top line of the sliding guide). Optional lower tray (LT-27CL) The optional lower tray can hold up to 530 sheets of paper (75 g/m2 or 20 lb). The maximum capacity is 44 mm paper height. Optional legal tray (LT-27LG) The optional legal tray can hold up to 250 sheets of paper (75 g/m2 or 20 lb). If you want to print on legal size paper, you must use this tray. You can use the optional legal tray as a standard paper tray (Tray 1). See Legal tray (LT-27LG) on page 4-5. The names for the paper trays in the printer driver and this Guide are as follows: Tray and optional unit Standard paper tray Optional legal tray Optional lower tray Optional duplex unit for duplex printing Name Tray 1 Tray 2 DX Suitable paper specifications The following paper specifications are suitable for this printer. Basis weight (g/m2) 75-90 Thickness (µm) 80-110 Roughness (sec.) Higher than 20 Stiffness (cm3/100) 90-150 Grain direction Long grain Volume resistivity (ohm) 10e9-10e11 Surface resistivity (ohm-cm) 10e10-10e12 Filler Ash content (wt%) CaCO3 (Neutral) Below 23 Brightness (%) Higher than 80 Opacity (%) Higher than 85 ABOUT THIS PRINTER 1 - 10