Brother International HL 2700CN Users Manual - English - Page 82
Network, Tcp/ip, Netware, Appletalk, Netbeui, Dlc/llc, Netbios/ip, Interface, Select, Auto If Time,
UPC - 840356824994
View all Brother International HL 2700CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Table 1: List of factory settings (Continued) MODE NETWORK INTERFACE MENU TCP/IP NETWARE APPLETALK NETBEUI DLC/LLC NETBIOS/IP ENET SELECT AUTO IF TIME INPUT BUFFER PARALLEL USB2.0 Factory Setting TCP/IP ENABLE=ON IP ADDRESS=169.254.###.### SUBNET MASK=255.255.0.0 GATEWAY=0.0.0.0 IP BOOT TRIES=3 IP METHOD=AUTO APIPA=ON NETWARE ENABLE=ON NET FRAME=AUTO =ON =ON =ON =ON =AUTO =AUTO =5 =LEVEL 3 HIGH SPEED=ON BI-DIR=ON HIGH SPEED=ON Automatic Private IP Addressing (APIPA) protocol, automatically configure an IP address and subnet mask. See the Network User's Guide, which is provided on the CD-ROM. CONTROL PANEL 3 - 25
CONTROL PANEL
3 - 25
NETWORK
TCP/IP
TCP/IP ENABLE=ON
IP ADDRESS=169.254.###.###
SUBNET MASK=255.255.0.0
GATEWAY=0.0.0.0
IP BOOT TRIES=3
IP METHOD=AUTO
APIPA=ON
NETWARE
NETWARE ENABLE=ON
NET FRAME=AUTO
APPLETALK
=ON
NETBEUI
=ON
DLC/LLC
=ON
NETBIOS/IP
=ON
ENET
=AUTO
INTERFACE
SELECT
=AUTO
AUTO IF TIME
=5
INPUT BUFFER
=LEVEL 3
PARALLEL
HIGH SPEED=ON
BI-DIR=ON
USB2.0
HIGH SPEED=ON
Automatic Private IP Addressing (APIPA) protocol, automatically configure an IP address and
subnet mask. See the Network User's Guide, which is provided on the CD-ROM.
Table 1: List of factory settings (Continued)
MODE
MENU
Factory Setting