Brother International HL 2700CN Users Manual - English - Page 135
Error message, Remarks, NO FUSING UNIT
UPC - 840356824994
View all Brother International HL 2700CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Error message Remarks NO TRAY 1/2 The indicated paper tray was not detected,install it, or make sure it is inserted properly. SIZE ERROR T2 Specify the correct paper size for the indicated tray. SIZE ERROR DX Can only Duplex on specified sizes. Check the printer driver settings and the paper size in the paper tray. STACKER FULL Remove the paper from the output tray. MEDIA MISMATCH Media mismatch between the Printer and the Printer Driver setting. Put XX in Tray . XX = Plain Paper, Transparencies, Thick Paper, Thicker Paper, Thin Paper SIZE MISMATCH Put Paper size in Tray . Paper mismatch between the Printer and the Printer Driver setting. MANUAL FEED Put paper into tray1, and then press GO. MEDIATYPE ERROR Specify the correct media type: XX XX=T1, T2, or DX XX = T1, T2 or DX NO FUSING UNIT A fusing unit was not detected. Please install one. CARD ERROR An error occurred while accessing the Flash card. Check that the driver is formatted and not in Write Protect mode. CARD REMOVAL The Flash card was removed while the printer was powered on. Power cycle the printer. STORAGE FULL The RAMDISK SIZE is set to 0 MB or there is no more space to store jobs. STORAGE FULL There is no space in the CompactFlash. DOWNLOAD FULL The download buffer of the printer is full. Add more memory to the printer. MEMORY FULL The printer memory is full and the printer is unable to print the page. Add more memory. 6 - 2 TROUBLESHOOTING