Brother International HL 2700CN Users Manual - English - Page 95
Duplex unit (DX-2700), How to install the duplex unit
UPC - 840356824994
View all Brother International HL 2700CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Duplex unit (DX-2700) The duplex unit is an optional device that allows you to print on both sides of a piece of paper. You can print on Letter, A4, B5 (JIS/ISO), Executive, A5 and Legal size paper. When it is installed, you can select either duplex printing or simplex printing on the control panel or with a software command. See PAPER on page 3-11 for details about the menu setting. How to install the duplex unit ■ This printer is heavy and weighs approximately 31.5 kg (69.4 lb). To prevent injuries, use at least two people to lift the printer. ■ When you lift the printer, be sure to use the handholds at the bottom four corners of the printer. ■ Do not carry the printer when the lower tray unit and/or the duplex unit are attached. Caution When moving or lifting this printer, keep the printer flat. To avoid spills, you must first remove the toner cartridges and waste toner pack. 1 Turn off the printer power switch and unplug the printer. 2 Remove the duplex upper cover, duplex lower cover and duplex cap at the back of the printer. We recommend removing the covers and the cap with a coin or a screwdriver. 3 Remove the protective parts. Figure 4-13 4 - 7 OPTIONS Figure 4-14