Brother International HL 2700CN Users Manual - English - Page 36

Paper feed Tray feed The printer can feed paper from the standard paper tray, optional lower tray or optional legal tray. When you put paper into the paper tray, note the following: ■ If your application software supports paper size selection on the print menu, you can select it through the software. If your application software does not support it, you can set the paper size in the printer driver or by using the control panel buttons. ■ The paper size has been set at the factory to Letter for 120 V models or A4 for 220/240 V models. If you want to use other sizes of paper or envelopes, change the paper size setting in PAGE FORMAT in the FORMAT menu by using the control panel buttons. For paper size selection, see PRINT MENU on page 3-13. ■ If you use pre-printed paper in the trays, please be sure to put the paper with the printed side face up and the top edge of the paper at the back of the paper tray. The printer automatically detects the paper size you have put into the paper tray. The printer will prompt you to put the correct size of paper in the tray as follows: SIZE MISMATCH Put paper size in Tray . Paper mismatch between the Printer and the Printer Driver setting If you want to put a different size of paper into the paper tray from the size that was selected in the paper size setting by using the control panel buttons or in your application software, you can change the paper size setting. Print on envelopes Adjust the paper length and width guides to fit the envelopes that are going to be used. Figure 1-13 ABOUT THIS PRINTER 1 - 18