Brother International HL 2700CN Users Manual - English - Page 26
Positioning the printer, Power Supply, Environment - windows 7
UPC - 840356824994
View all Brother International HL 2700CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Positioning the printer Please read the following before you use the printer. Power Supply Use the printer within the recommended power range. AC power: Frequency: ±10% of the rated power voltage 50/60 Hz (120 V or 220-240 V) The power cord, including extensions, should not exceed 5 meters (16½ feet). Do not share the same power circuit with other high-power appliances, such as an air conditioner, copier, shredder and so on. If you cannot avoid using the printer with these appliances, we recommend that you use a voltage transformer or a high-frequency noise filter. Use a voltage regulator if the power source is not stable. Environment ■ Make sure that the power outlet/socket is near the printer and is easy to get to so that, if there is an emergency, it can be easily unplugged. ■ Use the printer only within the following ranges of temperature and humidity: Temperature: Humidity: 10 °C to 32.5 °C (50 °F to 90.5 °F) 20% to 80% (without condensation) ■ Do not put the printer where the ventilation hole of the printer is blocked. Keep a gap of approximately 100 mm (4 in.) between the ventilation hole and the wall. ■ The printer should be used in a well-ventilated room. ■ Put the printer on a flat, horizontal surface. ■ Keep the printer clean. Do not put the printer in a dusty place. ■ Do not put the printer in direct sunlight. If you have to put it near a window, use a blind or a heavy curtain to protect the printer from direct sunlight. ■ Do not put the printer near devices that contain magnets or generate magnetic fields. ■ Do not subject the printer to strong physical shocks or vibrations. ■ Do not expose the printer to open/naked flames or salty or corrosive gasses. ■ Do not put objects on top of the printer. ■ Do not put the printer near an air conditioner. ■ Keep the printer horizontal when you carry it. ■ Do not place anything on top of the power cord including this machine. Do not allow the power cord to be stepped on. ABOUT THIS PRINTER 1 - 8