Brother International HL 2700CN Users Manual - English - Page 56
Automatic Emulation Selection, EMULATION, SETUP, EPSON default
UPC - 840356824994
View all Brother International HL 2700CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Automatic Emulation Selection This printer has an Automatic Emulation Selection feature. When the printer receives data from the computer, it automatically chooses the emulation mode. This feature has been set at the factory to ON. The printer can choose from the following combinations: EPSON (default) HP LaserJet BR-Script3 HP-GL EPSON FX-850 IBM HP LaserJet BR-Script3 HP-GL IBM ProPrinter XL To get the most out of this laser printer, we recommend that you use the Brother BR-Script3 emulation. The printer is set to the HP color printer emulation (PCL 5C) mode automatically. Since PCL 5C mode takes the highest priority in the Automatic Emulation Selection, in most cases you can start using the printer as it is with the factory settings. Emulation modes other than PCL 6, PCL 5C and BR-Script3 are monochrome emulation modes. You can select the emulation mode manually by using the control panel to access EMULATION in the SETUP menu. See SETUP on page 3-12. When you use the Automatic Emulation Selection, note the following: ■ The EPSON or IBM emulation mode priority must be selected, because the printer cannot distinguish between them. Since the factory setting is EPSON emulation mode, you might need to select the IBM emulation mode by using the control panel to access EMULATION in the SETUP menu. ■ Try Automatic Emulation Selection with your application software or network server. If it does not work properly, select the emulation mode manually by using either the printer control panel buttons or the emulation selection commands from your software. DRIVER AND SOFTWARE 2 - 19