Brother International HL 2700CN Users Manual - English - Page 119
Replacing the fusing unit,
UPC - 840356824994
View all Brother International HL 2700CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Replacing the fusing unit 1 Turn off the printer power switch. To avoid injury, wait until the printer has cooled down sufficiently before you replace the fusing unit. 2 Open the back cover of the printer. Figure 5-14 3 To release the fusing unit from the printer, release the lock levers that are on both sides of the fusing unit as shown in Figure 5-15. Figure 5-15 4 Hold the handles on both sides as you take the fusing unit out of the printer. Figure 5-16 5 - 14 ROUTINE MAINTENANCE
5 - 14
ROUTINE MAINTENANCE
Replacing the fusing unit
1
Turn off the printer power switch. To avoid injury, wait until the printer has cooled down sufficiently
before you replace the fusing unit.
2
Open the back cover of the printer.
Figure 5-14
3
To release the fusing unit from the printer, release the lock levers that are on both sides of the fusing
unit as shown in Figure 5-15.
Figure 5-15
4
Hold the handles on both sides as you take the fusing unit out of the printer.
Figure 5-16