Brother International HL-7050N Network Users Manual - English - Page 102
Create a new port, Hewlett, Packard Network Port, Card Address, Printer Ports, Location, Comment
UPC - 012502603375
View all Brother International HL-7050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
6 Select the Create a new port: option and highlight Hewlett- Packard Network Port. 7 Click Next. 8 A list of available print server MAC addresses (Ethernet addresses) appears in the larger box under Card Address. Select the address of the desired print server (you can see the Ethernet address on the printer configuration page). You can find the node name and MAC address by printing out the printer configuration page. Refer to the Quick Setup Guide for information on how to print the configuration page on your print server. 9 The selected print server address will then appear in the smaller box under Card Address. 10 Type in any desired name for the port (the name must not be the name of an existing port or DOS device, such as LPT1) and click OK then on the Printer Ports screen, click Next. 11 Select the correct driver click Next. 12 Give a name to the printer and specify if you wish to be able to print from DOS application. Then click Next. 13 Specify the share name (if you are going to share the printer). 14 Enter the Location and Comment information and click Next until you see the Completing the Add Printer Wizard screen. 15 Click Finish. DLC PRINTING 8 - 3