Brother International HL-7050N Network Users Manual - English - Page 92
How to Select the Print Server (AppleTalk/EtherTalk), APPLETALK ETHERTALK TCP/IP PRINTING 7 - 4
UPC - 012502603375
View all Brother International HL-7050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
How to Select the Print Server (AppleTalk/EtherTalk) Once the print server is connected on your network and the printer is powered on, the Brother print server's AppleTalk service name (default is BRN_xxxxxx_P1_AT, where xxxxxx is the last six digits of the Ethernet address (MAC address) should appear in the Chooser. You can find the service name and MAC address by printing out the printer configuration page. Refer to the Quick Setup Guide for information on how to print the configuration page on your print server. 1 Open the Chooser from the Apple Menu on the Macintosh, and then click on the LaserWriter icon (if necessary, select the appropriate AppleTalk zone from the Network Control Panel). Figure 2 Macintosh Chooser 2 Click on the appropriate print server and close the Chooser APPLETALK (ETHERTALK) TCP/IP PRINTING 7 - 4