Brother International HL-7050N Network Users Manual - English - Page 127
Using BRAdmin and the TCP/IP Protocol to set the IP address, 4 TCP/IP CONFIGURATION
UPC - 012502603375
View all Brother International HL-7050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Using BRAdmin and the TCP/IP Protocol to set the IP address If your PC is using the TCP/IP protocol, do the following: 1 Select TCP/IP filter in the left frame of the main window. 2 Select the Device menu and choose the Search Active Devices. If the print server is set to its factory default settings, it will not appear in the BRAdmin screen. However, selecting the Search Active Devices option will force the BRAdmin software to find the device as an unconfigured device. 3 Select the Device menu and choose Setup Unconfigured Device. 4 Select the MAC address of your print server and click the Configure button. You can find the node name and MAC address by printing out the printer configuration page. Refer to the Quick Setup Guide for information on how to print the configuration page on your print server. 5 Enter the IP address, Subnet mask and Gateway (if needed) of your print server. 6 Click OK then select Close. 7 With the correctly programmed IP address, you will see the Brother print server in the device list. 12 - 4 TCP/IP CONFIGURATION