Brother International HL-7050N Network Users Manual - English - Page 72
Configuring Netware 3 and NetWare 4 systems
UPC - 012502603375
View all Brother International HL-7050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Configuring Netware 3 and NetWare 4 systems Brother's BRAdmin application provides similar functionality to the NetWare PCONSOLE utility (or the NWADMIN utility in NetWare 4.1x or later). To use the BRAdmin application to configure a Brother print server under NetWare, make sure that you are logged in as SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.1x or later) and perform the appropriate steps as detailed in the following pages. You must install the Novell NetWare Client 32 if you wish to create queue information on your NetWare servers by BRAdmin. Configuring the Brother Print Server (Queue Server Mode in Bindery emulation mode) using BRAdmin 1 Make sure that you logged in as SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.xx or later). 2 Start BRAdmin. 3 One or more print servers will appear in the list (the default node names are BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). You can find the node name and MAC address by printing out the printer configuration page. Refer to the Quick Setup Guide for information on how to printer the configuration page on your print server. 4 Select the print server that you wish to configure and double click it. You will be asked for a password. The default password is access. 5 Select the NetWare tab. NOVELL NETWARE PRINTING 6 - 6