Brother International IntelliFax-1860C Users Manual - English - Page 41
Setting and changing the Memory Security password, Setting a password for the first time
View all Brother International IntelliFax-1860C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Security features Setting and changing the Memory Security password 4 Note If you have already set the password, you will not need to set it again. Setting a password for the first time 4 a Press Menu, 2, 0, 1. b Enter a 4-digit number for the password. Press OK. c When the LCD shows Verify:, re- enter the password. Press OK. d Press Stop/Exit. Changing your Memory Security password 4 a Press Menu, 2, 0, 1. b Press a or b to choose Set Password. Press OK. c Enter a 4-digit number for the current password. Press OK. d Enter a 4-digit number for a new password. Press OK. e When the LCD shows Verify:, re-enter the password. Press OK. f Press Stop/Exit. Turning Memory Security on/off 4 If you enter the wrong password when following the instructions below, the LCD will show Wrong Password. Re-enter the correct password. Turning Memory Security on 4 a Press Menu, 2, 0, 1. 4 b Press a or b to choose Set Security. Press OK. c Enter a 4-digit number for the current password. Press OK. d The machine goes offline and the LCD shows Secure Mode. Note If there is a power failure, the data will stay in memory for approximately 24 hours. Turning Memory Security off 4 a Press Menu. b Enter the registered 4-digit password. Press OK. Memory Security is automatically turned off. Note If you enter the wrong password, the LCD shows Wrong Password and stays offline. The machine will stay in Memory Security mode until the registered password is entered. 25