Brother International MFC-9340CDW Users Manual - English - Page 118
Log Access Error, Drum End SoonX - fuser replacement
View all Brother International MFC-9340CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Error Message Drum End SoonX 1 1 (X) shows the drum unit color that is near the end of its life. (BK)=Black, (Y)=Yellow, (M)=Magenta, (C)=Cyan. Drum ! Drum Stop Fuser Error Jam 2-sided Jam Inside Jam Manual Feed Jam Rear Jam Tray Limit Exceeded Log Access Error Low Temperature Cause The drum unit for the color indicated on the Touchscreen is near the end of its life. Action Order a new drum unit for the color indicated on the Touchscreen before you get a Replace DrumX message. The corona wires on the drum Clean the corona wires on the drum units (see units must be cleaned. Cleaning the corona wires on page 82). The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Put the toner cartridge into the drum unit that is indicated on the Touchscreen. Then reinstall the toner cartridge and drum unit assembly into the machine. It is time to replace the drum unit. Replace the drum unit for the color indicated on the Touchscreen. (see Replacing the drum units on page 86). The temperature of the fuser unit does not rise to a specified temperature within the specified time. The fuser unit is too hot. Press and hold down to turn the machine off, wait a few seconds, and then turn it on again. Leave the machine idle for 15 minutes with the power on. The paper is jammed underneath the paper tray or the fuser unit. See Paper is jammed underneath the paper tray on page 121. The paper is jammed inside the See Paper is jammed inside the machine machine. on page 118. The paper is jammed in the manual feed slot of the machine. See Paper is jammed in the manual feed slot on page 114. The paper is jammed in the back of the machine. See Paper is jammed at the back of the machine on page 116. The paper is jammed in the paper tray of the machine. See Paper is jammed in the paper tray on page 114. The print limit set in Secure Function Lock 2.0 was reached. Call your administrator to check your Secure Function Lock Settings. The machine could not access Call your administrator to check the Store Print the print log file in the server. Log to Network settings. For more information, see Network User's Guide: Store Print Log to Network The room temperature is too Increase the room temperature to allow the low for the machine to operate. machine to operate. 104