Brother International MFC-J4410DW Users Manual Basic - English - Page 104
Unable to Init.XX, A USB device or USB Flash memory
View all Brother International MFC-J4410DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Error Message Paper tray not detected. Please put the paper tray firmly back in the machine. Screen init. Fail Unable to CleanXX Unable to Init.XX Unable to PrintXX Unable to ScanXX Unusable Device Disconnect device from front connector & turn machine off & then on Unusable Device Please Disconnect USB Device. Wrong Ink Color Cause The paper tray is not completely inserted. Paper or a foreign object has prevented the paper tray from being inserted correctly. The Touchscreen was pressed before the power-on initialization was completed. Debris may be stuck between the lower part of the Touchscreen and its frame. The machine has a mechanical problem. -OR- A foreign object such as a paper clip or a piece of ripped paper is in the machine. A broken device has been connected to the USB direct interface. Action Slowly push the paper tray completely into the machine. Pull the paper tray out of the machine, and remove the jammed paper or foreign object. Slowly push the paper tray completely into the machine. Make sure that nothing is touching or resting on the Touchscreen. Insert a piece of stiff paper between the lower part of the Touchscreen and its frame and slide it back and forth to push out the debris. Open the scanner cover and remove any foreign objects and paper scraps from inside the machine. If the error message continues, disconnect the machine from the power for several minutes and reconnect it. (The machine can be turned off for approximately 24 hours without losing faxes stored in the memory. See Transferring your faxes or Fax Journal report on page 92.) Unplug the device from the USB direct interface, then press to turn the machine off and then on again. A USB device or USB Flash memory Unplug the device from the USB direct drive that is not supported has been interface. Turn the machine off and connected to the USB direct interface. then on again. For more information, visit us at http://solutions.brother.com/. An ink cartridge has been installed in the wrong position. Identify which ink cartridges are not in their color-coded positions and move them to their correct positions. 90