Brother International MFC-J4410DW Users Manual Basic - English - Page 122
Printing Received Faxes, Telephone Line or Connections, Difficulty, Suggestions
View all Brother International MFC-J4410DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Printing Received Faxes Difficulty Suggestions Condensed print Horizontal streaks Top and bottom sentences are cut off Usually this is caused by a poor telephone connection. Make a copy; if your copy looks good, you probably had a bad connection, with static or interference on the telephone line. Ask the other party to send the fax again. Missing lines Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the problem is with the sending machine. Try receiving from another fax machine. Left and right margins are cut off or a single page is printed on two pages. If the received faxes are divided and printed on two pages or if you get an extra blank page, your paper size setting may not be correct for the paper you are using. (MFC-J4410DW: See Paper Size on page 27.) (MFC-J4610DW: See Paper Size and Type (MFC-J4610DW) on page 28.) Turn on Auto Reduction. (See Advanced User's Guide: Printing a reduced incoming fax.) Received color fax prints only in black & white. Replace the color ink cartridges that have reached the end of their life, and then ask the other person to send the color fax again. (See Replacing the ink cartridges on page 74.) Telephone Line or Connections Difficulty Dialing does not work. (No dial tone) The machine does not answer when called. Suggestions Check all line cord connections. Make sure the telephone line cord is plugged into the telephone wall jack and the LINE jack inside the machine. (Canada only) Change the Tone/Pulse setting. (See Quick Setup Guide.) Send a manual fax by pressing Hook and dialing the number. Wait to hear fax receiving tones before pressing Fax Start. If there is no dial tone, connect a known working telephone and telephone line cord to the jack. Then lift the external telephone's handset and listen for a dial tone. If there is still no dial tone, ask your telephone company to check the line and wall jack. Make sure the machine is in the correct Receive Mode for your setup. (See Choose the correct Receive Mode on page 41.) Check for a dial tone. If possible, call your machine to hear it answer. If there is still no answer, make sure the telephone line cord is plugged into the telephone wall jack and the LINE jack inside the machine. If there is no ringing when you call your machine, ask your telephone company to check the line. 108