Canon EOS 60D EOS 60D Instruction Manual - Page 141
Set [Channel]., Select [Firing group]., Take the picture.
UPC - 013803129113
View all Canon EOS 60D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Using Wireless FlashN 5 Select [Wireless func.]. For [Wireless func.], select [0], then press . X Under [Wireless func.], [Channel], etc., will be displayed. 6 Set [Channel]. Set the channel (1-4) to the same one as the slave unit. 7 Select [Firing group]. For [Firing group], select [1All], then press . 8 Take the picture. As with normal flash shooting, you can set the camera and take the picture in the same way. To terminate wireless flash shooting, set [Wireless func.] to [Disable]. Setting [E-TTL II meter.] to [Evaluative] is recommended. Even if you disable the built-in flash from firing, it will still fire to control the slave unit. The slave unit cannot fire a test flash. 141
141
Using Wireless Flash
N
5
Select [Wireless func.].
For [
Wireless func.
], select [
0
],
then press <
0
>.
Under [
Wireless func.
], [
Channel
],
etc., will be displayed.
6
Set [Channel].
Set the channel (1-4) to the same one
as the slave unit.
7
Select [Firing group].
For [
Firing group
], select [
1
All
],
then press <
0
>.
8
Take the picture.
As with normal flash shooting, you
can set the camera and take the
picture in the same way.
To terminate wireless flash shooting,
set [
Wireless func.
] to [
Disable
].
Setting [
E-TTL II meter.
] to [
Evaluative
] is recommended.
Even if you disable the built-in flash from firing, it will still fire to control
the slave unit.
The slave unit cannot fire a test flash.