Canon EOS 60D EOS 60D Instruction Manual - Page 144
A:B] Multiple slave units in multiple groups, Set [Firing group] to, A:B]., Set the desired flash
UPC - 013803129113
View all Canon EOS 60D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Using Wireless FlashN [1 (A:B)] Multiple slave units in multiple groups Divide the slave units into groups A and B, and change the flash ratio to obtain the desired lighting effect. Refer to your Speedlite's instruction A B manual to set one slave unit's slave ID to A (Group A) and the other slave unit's ID to B (Group B) and position them as shown in the illustration. 1 Set [Firing group] to [1 (A:B)]. 2 Set the desired flash ratio and shoot. Select [A:B fire ratio] and set the flash ratio. If [Firing group] is set to [1 (A:B)], group C will not fire. The 8:1 to 1:1 to 1:8 flash ratio is equivalent to 3:1 to 1:1 to 1:3 stops (1/2stop increments). 144
144
Using Wireless Flash
N
[
1
(A:B)] Multiple slave units in multiple groups
Divide the slave units into groups A and
B, and change the flash ratio to obtain
the desired lighting effect.
Refer to your Speedlite’s instruction
manual to set one slave unit’s slave ID
to A (Group A) and the other slave unit’s
ID to B (Group B) and position them as
shown in the illustration.
1
Set [Firing group] to [
1
(A:B)].
2
Set the desired flash ratio and
shoot.
Select [
A:B fire ratio
] and set the
flash ratio.
A
B
If [
Firing group
] is set to [
1
(A:B)
], group C will not fire.
The 8:1 to 1:1 to 1:8 flash ratio is equivalent to 3:1 to 1:1 to 1:3 stops (1/2-
stop increments).