Canon EOS 60D EOS 60D Instruction Manual - Page 252

3 Custom Function SettingsN C.Fn I: Exposure C.Fn I -1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. Effective when you prefer to control the exposure in less fine increments than 1/3-stop increments. With setting 1, the exposure level will be displayed in the viewfinder and on the LCD panel as shown below. C.Fn I -2 0: 1/3-stop 1: 1-stop ISO speed setting increments C.Fn I -3 ISO expansion 0: Off 1: On For the ISO speed, "H" (equivalent to ISO 12800) will be selectable. Note that if [8C.Fn II -3: Highlight tone priority] is set to [1: Enable], "H" (equivalent to ISO 12800) cannot be set. C.Fn I -4 Bracketing auto cancel 0: On The AEB and WB-BKT settings will be canceled if you set the power switch to , clear the camera settings, or switch to the movie mode. AEB will also be canceled when the flash is ready to fire. 1: Off The AEB and WB-BKT settings will not be canceled even if you set the power switch to . (If the flash is ready to fire, AEB will be canceled temporarily, but the AEB amount will be retained.) 252