Canon LV-8225 LV-7290 User's Manual - Page 63

Setting Filter counter This function is used to set a frequency for the filter cleaning. Use the Point ▲▼ buttons to select Filter counter and then press the Point ► or the OK button to access the submenu items. Filter counter.........Show the total accumulated time of the filter use timer setting. Timer To set a timer, when the projector reaches the time, the Filter warning icon (Fig.1) appears on the screen and the total accumulated time turns red, indicating that the filter replacement is necessary. Filter counter reset... After replacing the filter, be sure to reset the timer. The Filter warning icon will not turn off until the filter counter is reset. For details about resetting the timer, refer to "Resetting the Filter Counter" on page 66. Fig.1 Filter warning icon Filter counter Press the OK button to select Timer, and then use the Point ▲▼ buttons to set the timer. Select from (Off/2000H/3000H/4000H) depending on the use environment. Filter warning icon appears on the screen at a set time (Off/2000H/3000H/4000H). Note: • This icon also appears at turning on. • The Filter warning icon (Fig.1) will not appear when the Display function is set to Off (p.53), during Freeze (p.28), or Blank (p.29). Factory default Warning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order. Note: When the Factory default function is executed, all the warning log records will be deleted. Factory default This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings. 63