Canon LV-8225 LV-7290 User's Manual - Page 64

Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. Direct Operation Press the INFO. button on the remote control unit to display the Information Menu. Remote control unit Menu Operation Press the Point ▲▼ buttons to select the Information. The Information Menu is displayed. See below for displayed information. Input The selected input source is displayed. H-sync freq. The horizontal frequency of the input signal is displayed in KHz, or - - - - KHz when no signal. V-sync freq. The vertical frequency of the input signal is displayed in Hz, or - - - - Hz when no signal. Numbers of Hz doubles when during Interlace. Aspect The selected Screen size is displayed. Language The selected language is displayed. Lamp status The selected lamp mode is displayed. Lamp counter The cumulative lamp operating time is displayed. Power management mode Off, Standby or Exit, and Timer are displayed. Key lock The selected Key lock icon is displayed. PIN code lock Off or On 1 or On 2 is displayed. Remote control The selected remote code is displayed. SERIAL NO. The serial number of the projector is displayed. The serial number is used to service the projector. 64 Information Menu INFO. button