Canon VB-S800D Mark II Network Camera Operation Guide - Page 101
[Basic] > [Network] Configuring Network Settings, LAN, IPv4
View all Canon VB-S800D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
[Basic] > [Network] Configuring Network Settings Network settings for connecting to the camera. The following settings can be configured here. • LAN • IPv4 • IPv6 5 • DNS • mDNS Setting Page Important If any network settings are changed, the camera may become inaccessible from the active web browser. In this case, a confirmation dialog box will be displayed when you click [Apply] or [Apply and reboot]. Click [OK] to apply the new settings. If you reboot the camera after changing settings and cannot connect to the camera from the web browser, any available URI for connecting to the camera will be displayed in a message. If you cannot connect to the camera through the displayed URI, contact your system administrator. LAN Set the LAN communication method and size of video transmitted from the camera. [LAN Interface] Select the interface suited to the device for connecting to the camera. Generally use [Auto]. [Maximum Packet Size] Enter the maximum packet size to be transmitted by the camera. Normally there is no need to change the default setting of 1500. A setting of 1280 or greater is necessary when using IPv6. When using ADSL, setting a slightly lower value may increase transmission efficiency. IPv4 Settings for using IPv4 to connect to the camera. The IPv4 address can be assigned by the DHCP server automatically or set manually. 83