Canon VB-S800D Mark II Network Camera Operation Guide - Page 124
Auto], Day Mode], Night Mode
View all Canon VB-S800D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
[Auto] The camera automatically determines ambient brightness and switches to Day Mode or Night Mode. [Day Mode] Captures normal color video. [Night Mode] Video turns to monochrome. Removes the infrared filter to increase sensitivity. HM4x H730 Important • If you use [Auto], conduct a thorough operation test beforehand to check the effectiveness of the setting. • When [Auto] is selected, set [Exposure] to [Auto], [Auto (Flickerless)], [Auto (Flickerless2)] ( S30 S31 S80x S90x ), [Auto (Shutter-priority AE)], or [Auto (Aperture-priority AE)] ( HM4x H730 ). • If you exit the Viewer while [Day Mode] or [Night Mode] is set, these will remain in effect, even if [Day/Night] is set to [Auto] on the Setting Page. To enable [Auto] Day/Night Mode, set [Day/Night] to [Auto] before exiting the Viewer. • If you use [Auto], the infrared filter may move several times while the mode is switching between Day Mode and Night Mode. You will not be able to use pan, tilt, zoom and manual focus during this period. HM4x H730 • If you use infrared illumination from an external device in Night Mode, turn on the infrared illumination before switching to Night Mode. HM4x H730 • The camera is equipped with an infrared filter, but infrared illumination is not possible because the camera does not have a feature to remove the filter. S30 S31 S80x S90x 106