Canon VB-S800D Mark II Network Camera Operation Guide - Page 125
[Camera] > [Day/Night Mode Focus] Day/Night Mode Focus, Day/Night Mode Focus
View all Canon VB-S800D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
[Camera] > [Day/Night Mode Focus] Day/Night Mode Focus HM4x H730 Set the focus position when switching day/night. It is necessary to change the focus position since the wavelengths of regular lighting such as fluorescent lamps and infrared lighting differ. The following settings can be configured here. • Day/Night Mode Focus • Camera Control 5 Setting Page Important Even if you use [Day/Night Mode Focus] with the night mode, the camera may be out of focus due to changes in the light source (when sunlight mixes with infrared lighting, etc.). Note You can set [Day/Night Mode Focus] when [Focus] (P. 101) is set to [Manual]. Day/Night Mode Focus [Day/Night Mode Focus Control] Set the focus control method when switching day/night. [Use One-shot AF] Select this to use One-shot AF when switching Day/Night Mode. Important When using [Use One-shot AF] and switching between Day/Night Mode, it may not be possible to focus on the intended subject if another subject, such as a person, passes in front of the camera. [Move to registered focus position] When switching Day/Night Mode, the focus positions preregistered in [Day Mode Focus Position] or [Night Mode Focus Position] will be used. For more information, please refer to "Registering a Focus Position". [None] HM4x When switching Day/Night Mode, the camera automatically focuses on each of the fluorescent lighting focus positions set beforehand for Day Mode and Night Mode. [Compensate for light source] H730 Adjust the focus position to suit the light source when switching to Night Mode. [Light Source] H730 If you selected [Compensate for light source], select the light source. 107