Canon VB-S800D Mark II Network Camera Operation Guide - Page 95

Important • If you open another window or tab to access the camera while an authenticated web page is displayed, the authentication information of the displayed web page may be discarded. In this case, enter the authentication information again. • To ensure security, exit the web browser after completing settings on the Setting Page and after using the Camera Viewer. • Do not open multiple Setting Pages at one time and try to change the settings of a single camera. Common Setting Page Operations This section explains basic Setting Page operations, and operations common to all Setting Pages. 5 Note If you have enabled settings in your web browser to not display dialog boxes, you may be unable to perform operations on the Setting Page. If this happens, exit your web browser and launch it again. Setting Page  Applying Changes to Settings If you change a setting on the Setting Page, the [Apply] and [Clear] buttons on the upper right or lower right of the screen is no longer grayed out and can be clicked. Click [Apply] in this state to apply the changed settings. Click [Clear] to revert to the previous settings.  Setting Changes Requiring Rebooting Items that require the camera to be rebooted in order to apply the changed settings are indicated with an orange symbol to their right. When any item indicated with an orange symbol is changed, [Apply] displayed at the upper right and lower right of each Setting Page changes to [Apply and reboot]. Click [Apply and reboot] to apply the changed settings and reboot the camera. Click [Clear] to revert to the previous settings. Important Setting changes will be lost if you navigate to another Setting Page without clicking [Apply] or [Apply and reboot]. Be sure to click [Apply] or [Apply and reboot] to apply the changed settings. However, changes for [Initial Settings] are saved even if you navigate to another page without clicking [Apply], so click [Clear] if you want to discard those settings.  Return to the Settings Menu Click [Settings Menu] at the upper right of each Setting Page to return to the setting menu. Important Do not use the [Back] or [Forward] buttons in the web browser to navigate Setting Pages. The changed settings may revert to the original settings or unwanted setting changes may be applied. 77