Canon VB-S800D Mark II Network Camera Operation Guide - Page 109

[Basic] > [Video] Setting Video Size and Quality General video settings, such as the size and quality of JPEG and H.264 video transmitted from the camera. [Video] is common with [Video] found in [Video and Audio] and [Video Record]. A setting configured in any of the [Video] submenus will be reflected in the other [Video] submenus as well. The following settings can be configured here. • All Videos 5 • JPEG • H.264(1) • H.264(2) Setting Page Important • The following may occur if video size, video quality and target bit rate are set higher, as this increases network load and data size per frame. - JPEG: The frame rate may drop - H.264: Video may be temporarily disrupted • In case of H.264 video, block noise may become noticeable if a large video size and low target bit rate are set. • The data size may increase depending on the type or movement of the subject. If the frame rate remains low or other undesirable conditions continue for a prolonged period, lower the video size or quality setting. • The RM-Lite can only record JPEG video. All Videos Set the video size sets used by the camera. All options in the [Video] submenu and the size sets that can be selected in [Video Size] in all of the Setting Pages are determined by the video size set selected here. This also determines the video sizes and screen sizes that can be selected by each Viewer. [Video Size Set] Categories and aspect ratios vary according to each video size set. [Video Size Set] [1920 x 1080 / 960 x 540 / 480 x 270]* [1280 x 720 / 640 x 360 / 320 x 180] [1280 x 960 / 640 x 480 / 320 x 240] 1080p 720p 4:3 Category Aspect Ratio 16:9 16:9 4:3 * For VB-M44, VB-S805D Mk II and VB-S905F Mk II, [1920 x 1080 / 960 x 540 / 480 x 270] cannot be set for [Video Size Set]. 91