Canon VB-S800D Mark II Network Camera Operation Guide - Page 12

 List of Factory Default Settings The setting values for the factory default settings are changed as indicated below. Item • IPv4 IPv4 Address Settings Method • DNS Set Name Server Address Automatically • Administrator Account Administrator Name Password • User Authority Guest User Camera Control • User Authority Guest User Audio Distribution • Camera Name Camera Name (alphanumeric characters) • Camera Settings Focus • Camera Settings Day/Night • Memory Card Operations Overwrite videos Before Change Manual Disable With setting values Video distribution and Camera control Yes Camera Manual Day Mode Disable After Change Auto (DHCP) Use DHCP/DHCPv6 Without setting values No access privileges No Model Name (Example) VB-M50B Auto Auto Enable Note Since cameras with the factory default settings are configured to obtain an IP address from the DHCP server, detect the camera by Camera Management Tool using a DHCP environment or an IPv6 environment. If you configure the settings using other environments, please refer to "Operation Guide" > "Setting up the network without a DHCP server".  Setting Name Changes Note Setting names other than the following may also have been changed, depending on the model you are using. The setting name of [Bit Rate Control] has been changed in [Basic] > [Video] > [H.264(1)] and [H.264(2)]. • [Use bit rate control] changed to [Use bit rate control (constant bit rate)] • [Do not use bit rate control] changed to [Do not use bit rate control (variable bit rate)] xii