Canon VB-S800D Mark II Network Camera Operation Guide - Page 200

[Volume Detection]/[Scream Detection] Select whether an ON event or OFF event triggers a linked event in [Volume Detection Status]/[Scream Detection Status]. [External Device Input] Select External Device Input in [External Device Input], and then select an active event or inactive event to trigger a linked event in [External Device Input Status]. [Timer] Select the timer event number to use in [Timer]. [Intelligent Function] Select the Intelligent Function detection setting number (P. 162) to use in [Intelligent Function], then select whether an ON event or OFF event triggers a linked event in [Intelligent Function Status]. Note You cannot set the same event type for [Event 1] and [Event 2]. However, a combination of [Timer 1] to [Timer 4] can be set for [Timer]. Also, a combination of [Input 1] and [Input 2] can be specified for [External Device Input]. HM4x H730  Operation Set the operations to be performed when linked events are triggered. [ON Event Operation] If [Enable] is set, [Preset] ( HM4x S30 S31 ), [Video Record] and [E-mail Notification] will be executed according to their settings when a linked event is triggered (ON event). [OFF Event Operation] If [Enable] is set, [Preset] ( HM4x S30 S31 ), [Video Record] and [E-mail Notification] will be executed according to their settings when a linked event is completed (OFF event). [Ongoing ON Event Operation] Select the operations to be performed during an ON event. If [Enable] is selected, [Video Record] and [E-mail Notification] will be executed according to their settings during the linked event. [Preset] HM4x S30 S31 If you specify a preset, the camera angle will automatically move to the preset location when a linked event is triggered. It is necessary to set presets beforehand with [Camera] > [Preset] (P. 118). Note HM4x S30 S31 [Preset] cannot be configured when [Intelligent Function] is included in [Event Type]. [Video Record] Select whether to record video depending on the linked event. If you select [Enable] and a linked event is triggered, video will be transmitted to the recording destination specified in [Video Record] > [Upload] > [Video Record Action] (P. 144). [E-mail Notification] Select whether to send an e-mail notification depending on the linked event. If you select [Enable] and a linked event is triggered, an e-mail notification will be sent. To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 148) beforehand. [External Device Output for ON Event] Select the states of external device output when an ON event is triggered. [External Device Output for OFF Event] Select the states of external device output when an OFF event is triggered. [Audio Playback at ON Event] HM4x H730 If you select [Enable], the sound clip specified in [Sound Clip] will play back when a linked event is triggered. [Audio Playback at OFF Event] HM4x H730 If you select [Enable], the sound clip specified in [Sound Clip] will play back when a linked event completes. 182