Canon imagePROGRAF iPF760 Basic Guide - Page 109

iPF760 MediaType Mismatch Error Message Messages regarding paper MediaType Mismatch ...109 The paper is too small...109 The paper is too small...110 PaprWidth Mismatch ...111 Paper size not detected...111 Insufficient paper for job ...112 This paper cannot be used...112 Roll printing is selected...112 Roll printing is selected, but sheets are loaded 113 The roll is empty...113 Sheet printing is selected...113 Regular printing is selected, but a roll is loaded 114 Paper jam ...114 Paper is crooked...114 Paper not aligned with right guide...115 Cannot detect papr ...115 Paper cutting failed...115 End of paper feed...116 Rel lever is in wrong position...116 Borderless printng not possible...116 Paper position not suitable for borderless printing 117 Roll paper is not securely in contact with roll holder 117 MediaType Mismatch Cause When Detect Mismatch in the Control Panel menu is set to Pause, the type of paper loaded does not match the type specified in the printer driver. Corrective Action Follow these steps to ensure the paper type matches on the printer and in the printer driver. 1. Press ▲ or ▼ to select Stop Printing, and then press the OK button. 2. Either change the type of paper specified in the printer driver settings or replace the loaded paper and change the paper type setting on the printer. (See "unknown.") →User's Guide (See "unknown.") →User's Guide You tried to print a test pattern for printer adjustment on several sheets, but sheets of different types of paper were used. When printing a test pattern for adjustment, use sheets of the same type of paper, in the required quantity. Replace the paper as follows and perform adjustment again. 1. Press ▲ or ▼ to select Stop Printing, and then press the OK button. 2. Replace the paper. (See "unknown.") →User's Guide 3. Execute adjustment again from the control panel menu. Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may cause paper jams and affect the printing quality. When Detect Mismatch in the Control Panel menu is set to Warning, the type of paper loaded does not match the type specified in the printer driver. You can continue to print, but note that this error may cause problems in the printing results. Error Message Messages regarding paper The paper is too small. Cause Corrective Action When Detect Mismatch in the Control Panel menu is Press ▲ or ▼ to select Print, and then press the OK button to resume printing. 109 set to Pause, paper smaller than the size specified in However, note that this error may cause paper jams and affect the printing quality. the printer driver is loaded. Basic Guide