Canon imagePROGRAF iPF760 Basic Guide - Page 127

iPF760 Error Messages Borderless printng not possible...116 Cannot adjust paper feed...120 Cannot adjust printhead...121 Cannot detect papr ...115 Check printed document...120 Close Ink Tank Cover ...118 Do not pull out ink tank...119 End of paper feed...116 ERROR Exxx-xxxx (x represents a letter or number 125 Error in cutter position...126 Execute printhead cleaning...121 GARO Wxxxx (x represents a number) ...125 GL2: W0502 The parameter is out of range 124 GL2: W0504 This command is not supported 124 GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904 124 Hardware error. xxxxxxxx-xxxx (x represents a letter or number 125 Ink insufficient...118 Ink tank is empty...119 Insert the maintenance cartridge...123 Insufficient paper for job ...112 Error Message Maint. cart. The level is low ...123 Maintenance cartridge full...123 Maintenance cartridge problem...123 MediaType Mismatch ...109 Multi-sensor error ...126 No ink left...118 No ink tank loaded...119 No Maintenance Cartridge capacity...123 No printhead ...121 Not much ink is left...119 Error Messages Paper cutting failed...115 Paper is crooked...114 Paper jam ...114 Paper not aligned with right guide...115 Paper position not suitable for borderless printing 117 Paper size not detected...111 PaprWidth Mismatch ...111 Parts replacement time has passed...126 Prepare for parts replacement...126 Printhead error ...121 Regular printing is selected, but a roll is loaded 114 Rel lever is in wrong position...116 Remaining level of the ink cannot be correctly detected 118 Roll paper is not securely in contact with roll holder 117 Roll printing is selected, but sheets are loaded 113 Roll printing is selected...112 Sheet printing is selected...113 The paper is too small...109 The paper is too small...110 The roll is empty...113 This paper cannot be used...112 This type of paper is not compatible with HP-GL/2 124 127 Top cover is open...125 Basic Guide