Canon imagePROGRAF iPF760 Basic Guide - Page 112

Insufficient paper for job, This paper cannot be used., Roll printing is selected.

Get Canon imagePROGRAF iPF760 PDF manuals and user guides View all Canon imagePROGRAF iPF760 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 112 highlights

Insufficient paper for job Cause Paper has been loaded askew, or warped paper has been loaded. iPF760 Corrective Action 2. Load the sheet, aligning it with the guide on the right. 3. Pull the Release Lever forward. 4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. (See "Loading Sheets in the Printer.") →P.18 Because the Platen is soiled with ink or other substances, the size of the clear film cannot be detected. Open the Top Cover and clean the entire Platen. (See "Cleaning Inside the Top Cover.") →P.39 Insufficient paper for job Cause The printer has received a print job longer than the amount of roll paper left when ManageRemainRoll in the Control Panel menu is On. Corrective Action Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, the roll paper may run out during the print job and you may not be able to print all of the document. Press ▲ or ▼ to select Change Paper, and then press the OK button to stop printing. Either change the printer driver Paper Source setting or the GL2 Settings > Paper Source setting in the printer menu or replace the roll with a roll that has enough paper for the print job, and then try printing again. (See "Removing the Roll from the Printer.") →P.15 (See "Loading Rolls in the Printer.") →P.12 Error Message Messages regarding paper This paper cannot be used. Cause Paper smaller than the printer's minimum supported size has been loaded. Paper has been loaded that is too small to print the test pattern for printhead adjustment or nozzle checking. Corrective Action Push the Release Lever back and load paper of the correct size. (See "Paper Sizes.") →User's Guide Push the Release Lever back and load unused paper of A4 size or larger. More than one sheet may be required depending on the adjustment. Roll printing is selected. Cause You have attempted to print a test print sheet or other printer status information on a roll, but no roll is loaded. 112 Corrective Action Press ▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the roll, and then print. (See "Attaching the Roll Holder to Rolls.") →P.9 (See "Loading Rolls in the Printer.") →P.12 To print on sheets, follow these steps. Basic Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
Cause
Corrective Action
Paper has been loaded askew, or warped paper has been loaded.
2.
Load the sheet, aligning it with the guide on the right.
3.
Pull the Release Lever forward.
4.
If "
Not finished printing. Finish printing remaining jobs?
"
is shown on the Display Screen, press the
OK
button.
Printing will resume, starting from the page on which the er-
ror occurred.
(See "Loading Sheets in the Printer.")
→P.18
Because the Platen is soiled with ink or other substances, the size of
the clear film cannot be detected.
Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
→P.39
Insufficient paper for job
Insufficient paper for job
Cause
Corrective Action
The printer has received a print job longer than the amount of roll paper left
when
ManageRemainRoll
in the Control Panel menu is
On
.
Press
▲
or
▼
to select
Print
, and then press the
OK
button to resume printing.
However, the roll paper may run out during the print job
and you may not be able to print all of the document.
Press
▲
or
▼
to select
Change Paper
, and then press
the
OK
button to stop printing.
Either change the printer driver
Paper Source
setting or
the
GL2 Settings
>
Paper Source
setting in the printer
menu or replace the roll with a roll that has enough paper
for the print job, and then try printing again.
(See "Removing the Roll from the Printer.")
→P.15
(See "Loading Rolls in the Printer.")
→P.12
This paper cannot be used.
This paper cannot be used.
Cause
Corrective Action
Paper smaller than the printer's minimum supported
size has been loaded.
Push the Release Lever back and load paper of the correct size.
(See "Paper Sizes.")
→User's Guide
Paper has been loaded that is too small to print the test
pattern for printhead adjustment or nozzle checking.
Push the Release Lever back and load unused paper of A4 size or larger. More
than one sheet may be required depending on the adjustment.
Roll printing is selected.
Roll printing is selected.
Cause
Corrective Action
You have attempted to print a test print sheet or
other printer status information on a roll, but no
roll is loaded.
Press
▲
or
▼
to select
Load Roll Paper
, and then press the
OK
button. Load the
roll, and then print.
(See "Attaching the Roll Holder to Rolls.")
→P.9
(See "Loading Rolls in the Printer.")
→P.12
To print on sheets, follow these steps.
Insufficient paper for job
iPF760
Basic Guide
Error Message
Messages regarding paper
112