Cisco 2948G Hardware Installation Guide - Page 78
Port Cabling Specifications
UPC - 746320228884
View all Cisco 2948G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Installing, Removing, and Maintaining GBICs Chapter 4 Configuring the Gigabit Ethernet Ports Note Because of interoperability issues, Cisco does not support GBICs purchased from third-party vendors. Port Cabling Specifications Table 4-2 provides cabling specifications for the GBICs. The minimum cable distance for all GBICs listed (MMF [multimode fiber] and SMF) is 6.5 feet (2 meters). Note For information about the Coarse Wave Division Multiplexing (CWDM), refer to the Cisco CWDM GBIC and CWDM SFP Installation Note. Table 4-2 GBIC Port Cabling Specifications GBIC SX2 Wavelength1 (nm) Fiber Type 850 MMF Core Size (microns) 62.5 Modal Bandwidth Maximum Cable (MHz/km) Distance 160 722 ft (220 m) 62.5 200 902 ft (275 m) 50.0 400 1640 ft (500 m) LX/LH 1300 50.0 500 MMF3 62.5 500 1804 ft (550 m) 1804 ft (550 m) 50.0 400 1804 ft (550 m) 50.0 500 1804 ft (550 m) SMF 9/10 - 6.2 mi (10 km) ZX 1550 SMF 9/10 - SMF4 - - 43.5 mi (70 km) 62.1 mi (100 km) 1. Nominal fiber specification wavelength. 2. MMF only. 3. Patch cord required (refer to the "Patch Cord" section on page 4-10 for details). 4. Dispersion-shifted single-mode fiber-optic. Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide 4-4 78-6286-05