Cisco 2948G Hardware Installation Guide - Page 79
GBIC Optical Power Characteristics, GBIC Cabling Restrictions
UPC - 746320228884
View all Cisco 2948G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 4 Configuring the Gigabit Ethernet Ports Installing, Removing, and Maintaining GBICs GBIC Optical Power Characteristics Table 4-3 provides the GBIC optical power characteristics. Note For information about the Coarse Wave Division Multiplexing (CWDM), refer to the Cisco CWDM GBIC and CWDM SFP Installation Note. Table 4-3 GBIC Optical Power Characteristics Parameter 1000BASE-SX (WS-G5484) Transmitter output power 0/-9.5 dBm (min/max) Receiver maximum input 0 dBm power Receiver sensitivity -17 dBm Channel insertion loss 50/125 micron1 MMF 3.4 dBm 62.5/125 micron MMF 3.2 dBm 9/10 micron SMF - 1. 1 micron (µ) equals 1 micrometer or 10-6 meters 1000BASE-LX/LH 1000BASE-ZX (WS-G5486) (WS-G5487) -3/-9.5 dBm 0/4.77 dBm -3 dBm -3 dBm -19 dBm -23 dBm 4.4 dBm 6 dBm 6.5 dBm - - 21.5 dBm GBIC Cabling Restrictions You must observe the following fiber-optic cabling restrictions when using GBICs: • The minimum cabling distance for 1000BASE-SX and 1000BASE-LX/LH GBICs is 6.5 feet (2 meters). • The maximum cabling distance for each GBIC type is listed in Table 4-2. 78-6286-05 Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide 4-5