Compaq D51s Troubleshooting Guide - Page 40
Solving Network Problems - driver
UPC - 890552632367
View all Compaq D51s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Troubleshooting Without Diagnostics Solving Network Problems Some common causes and solutions for network problems are listed in the following table. These guidelines do not discuss the process of debugging the network cabling. Solving Network Problems Problem Remote Wakeup feature is not functioning. Network driver does not detect network controller. Network status link light does not turn on or it never flashes. ✎ The network status light is supposed to flash when there is network activity. Cause The Remote Wakeup feature is not available when using an AUI network connection. Remote Wakeup is not enabled. Network controller is disabled. Incorrect Network Driver. No active network is detected. Network controller is not set up properly. System is configured for AUI connection. Network driver is not properly loaded. Solution Use an RJ-45 network connection. Use the Network control application to enable Remote Wakeup. See the Desktop Management Guide. Run Computer Setup and enable network controller. Check the network controller documentation for the correct driver or obtain the latest driver from the manufacturers Web site. Check cabling and network equipment for proper connection. Use the Network control application to verify that device is working properly. See the Network Communications Guide. No solution; link LED does not apply to AUI connections. Reinstall network drivers. See the Network Communications Guide. 2-26 Troubleshooting Guide