Compaq D51s Troubleshooting Guide - Page 52
Numeric Codes and Text Messages, Control Panel., Code/Message, Beeps, Probable Cause - beep codes
UPC - 890552632367
View all Compaq D51s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Post Error Messages Numeric Codes and Text Messages Code/Message 102-System Board Failure Beeps None 103-System Board Failure None 150-SafePost Active None 162-System 2S* Options Not Set *L = Long, S = Short Probable Cause Recommended Action DMA, timers, and so forth. 1. Clear CMOS. 2. Remove expansion boards. 3. Replace the system board. DMA, timers, and so forth. 1. Clear CMOS. 2. Remove expansion boards. 3. Replace the system board. A PCI expansion card is not responding. 1. Restart the computer. 2. Disable SafePost. 3. If the expansion card does not respond, replace the card. Configuration incorrect. RTC (real-time clock) battery may need to be replaced. Battery life is approximately 3-5 years. Run Computer Setup. Reset the date and time under Control Panel. If the problem persists, replace the RTC battery. See the Hardware Reference Guide for instructions on installing a new battery, or contact your Compaq authorized dealer or reseller for RTC battery replacement. A-2 Troubleshooting Guide