Compaq D51s Troubleshooting Guide - Page 80
Click on your workstation model, then look for a Customer Advisory
UPC - 890552632367
View all Compaq D51s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Installing SCSI Drivers for Windows NT Installation On your primary system: 1. Place the OS CD in the CD-ROM drive and boot the system. 2. When the message "Setup is inspecting your computer's hardware configuration" display, press the F6 key. The system will prompt you for the SCSI drivers. 3. Insert the diskette containing the drivers. When prompted, choose S from the list to specify an additional device. 4. Choose Other from the list. When prompted, select your SCSI controller. 5. Press the Enter key to continue the installation. After the drivers are installed, install Windows NT on your SCSI hard drive. Remember to install the latest Service Pack. ✎ For more information, visit the Compaq Web site at: www.compaq.com/support/workstations Click on your workstation model, then look for a Customer Advisory related to the issue. E-2 Troubleshooting Guide