Compaq D51s Troubleshooting Guide - Page 58
Run Computer Setup or
UPC - 890552632367
View all Compaq D51s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Post Error Messages Numeric Codes and Text Messages Code/Message 605-Diskette Drive Type Error Beeps 2S* 610-External Storage Device Failure 611-Primary Floppy Port Address Assignment Conflict 612-Secondary Floppy Port Address Assignment Conflict 660-Display cache is detected unreliable None 2S* 2S* None 912-Computer Cover Has Been Removed Since Last System Startup None *L = Long, S = Short Probable Cause Mismatch in drive type. External tape drive not connected. Configuration error. Recommended Action 1. Run Computer Setup or Microsoft Windows NT, Microsoft Windows 95, or Microsoft Windows 98 utilities. 2. Disconnect any other diskette controller devices (tape drives). 3. Clear CMOS. Reinstall tape drive or press F1 and allow system to reconfigure without the drive. Run Computer Setup or Windows NT or Windows utilities. Configuration error. 1. Run Computer Setup. 2. Remove expansion cards. 3. Clear CMOS. Integrated graphics controller display cache is not working properly and will be disabled. Replace system board if minimal graphics degrading is an issue. No action required. A-8 Troubleshooting Guide