Compaq ProLiant 5500 Compaq ProLiant 5500 Setup and Installation Guide Pentium - Page 125
SCSI Cable Usage Matrix for Simplex Mode
View all Compaq ProLiant 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
7-10 Cabling SCSI Cable Usage Matrix for Simplex Mode Continued Controller Integrated SCSI-Port 2 Controller See Note 2. Hot-Plug SCSI Hard Drives in Internal Drive Cage In Simplex mode, the recommended use for SCSI PORT 2 is for the removable media bay devices. If SCSI PORT 1 is unavailable for the hard drives: s Connect 19-inch point-to-point non-terminated SCSI cable (199606-007) from SCSI Port 2 to SCSI Input 0 of Simplex board. 2/4 DAT Drive 4/8 DAT Drive Internal TurboDAT Autoloader 8X SCSI CD-ROM 4/16 TurboDAT 15/30 DLT Drive s Connect the 22-inch 3-device terminated SCSI cable (199616-010) from SCSI Port 2 to the removable media bay devices. s Use 50 to 68 pin adapter (199618-001) if needed. s See note 1. 35/70 DLT Drive s Connect the 22-inch 3-device terminated SCSI cable (199616010) from SCSI Port 2 to the removable media bay devices. Continued For use with Intel Pentium II Xeon processor-based servers only