Compaq ProLiant 5500 Compaq ProLiant 5500 Setup and Installation Guide Pentium - Page 97
Configuring the Integrated Management Display, Setup with the System, Configuration Utility
![]() |
View all Compaq ProLiant 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
6-4 Integrated Management Display Configuring the Integrated Management Display The Compaq Integrated Management Display can be configured to display a variety of menus that can be customized to meet each user's specific needs. The following information explains how to configure and customize the Integrated Display. Setup with the System Configuration Utility After installing the hardware, configure the Integrated Managment Display using the System Configuration Utility located on the Compaq SmartStart and Support Software CD. It is recommended that this version of System Configuration be used because it is the latest one that supports the new Integrated Management Display. To run the utility: 1. Boot the computer from the Compaq SmartStart and Support Software CD. 2. From the Compaq System Utilities screen select Run System Configuration Utility. 3. Select Continue. 4. Select Review or modify hardware settings and press Enter. 5. Select Step 3: View or Edit Details and press Enter. 6. Scroll down until you find the section entitled Embedded Compaq LCD Module. 7. Highlight the field to be modified. Press Enter to edit the highlighted item, then type the text for that field. After entering the text, press Enter to accept the modifications. Each field is discussed in detail later in this chapter. See "Customizing Management Display Fields." 8. Repeat step 7 for each menu item to be modified. 9. Press F10 to exit the View or Edit Details screen. 10. Select Step 5: Save and Exit. For use with Intel Pentium II Xeon processor-based servers only
![](/manual_guide/products/compaq-proliant-5500-compaq-proliant-5500-setup-installation-guide-pentium-ii-xeon-processorbased-servers-eeb44d9/97.png)