Compaq ProLiant 5500 Compaq ProLiant 5500 Setup and Installation Guide Pentium - Page 59
Attaching Server Rails, Attach the flat side of a server rail to each side of the server chassis
View all Compaq ProLiant 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
3-20 Rack-Mount Server Installation Attaching Server Rails 1. Place the tab on a server rail at the front of the server chassis. The holes in the server rail will line up only one way with the chassis. 2. Attach the flat side of a server rail to each side of the server chassis with four 8-32 x 1/4-inch Phillips screws. Do not use washers with the screws. Figure 3-12. Attaching a server rail to the server For use with Intel Pentium II Xeon processor-based servers only
3-20
Rack-Mount Server Installation
For use with Intel Pentium II Xeon processor-based servers only
Attaching Server Rails
1.
Place the tab on a server rail at the front of the server chassis. The holes
in the server rail will line up only one way with the chassis.
2.
Attach the flat side of a server rail to each side of the server chassis with
four 8-32 x 1/4-inch Phillips screws. Do not use washers with the
screws.
Figure 3-12.
Attaching a server rail to the server